NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Honeywell Local/Remote Control Application 23<br />
3.2 Control I/O<br />
Reference potentiometer,<br />
1…10 kΩ<br />
Remote control<br />
24V<br />
Remote reference<br />
0(4)-20 mA<br />
Remote control ground<br />
OPT-A1<br />
Terminal Signal Description<br />
1 +10V ref Reference output Voltage for potentiometer, etc.<br />
2 AI1+ Analogue input, voltage range<br />
0—10V DC<br />
Place B frequency reference<br />
range 0-10 V DC<br />
3 AI1- I/O Ground Ground for reference and controls<br />
4 AI2+ Analogue input, current range Place A frequency reference,<br />
5 AI2- 0—20mA<br />
range 0-20 mA<br />
6 +24V Control voltage output Voltage for switches, etc. max 0.1 A<br />
7 GND I/O ground Ground for reference and controls<br />
8 DIN1 Place A start forward<br />
Contact closed = start forward<br />
(programmable)<br />
9 DIN2 Place A start reverse<br />
Contact closed = start reverse<br />
(programmable)<br />
10 DIN3 External fault input<br />
(programmable)<br />
Contact open = no fault<br />
Contact closed = fault<br />
11 CMA Common for DIN 1—DIN 3 Connect to GND or +24V<br />
12 +24V Control voltage output Voltage for switches (see #6)<br />
13 GND I/O ground Ground for reference and controls<br />
14 DIN4 Place B: Start forward<br />
(programmable)<br />
Contact closed = start forward<br />
15 DIN5 Place B: Start reverse<br />
(programmable)<br />
Contact closed = start reverse<br />
READY<br />
220<br />
VAC<br />
RUN<br />
mA<br />
16 DIN6 Place A/B selection Contact open = place A is active<br />
Contact closed = Place B is active<br />
17 CMB Common for DIN4—DIN6 Connect to GND or +24V<br />
18 AO1+ Output frequency<br />
Programmable<br />
19 AO1- Analogue output<br />
Range 0—20 mA/R L , max. 500Ω<br />
20 DO1 Digital output<br />
READY<br />
OPT-A2<br />
21 RO1<br />
22 RO1<br />
23 RO1<br />
24 RO2<br />
25 RO2<br />
26 RO2<br />
Relay output 1<br />
RUN<br />
Relay output 2<br />
FAULT<br />
Programmable<br />
Open collector, I≤50mA, U≤48 VDC<br />
Programmable<br />
Programmable<br />
Table 3-1. Local/Remote control application default I/O configuration.<br />
Note: See jumper selections below.<br />
More information in the product's<br />
User's <strong>Manual</strong>.<br />
Jumper block X3:<br />
CMA and CMB grounding<br />
CMB connected to GND<br />
CMA connected to GND<br />
CMB isolated from GND<br />
CMA isolated from GND<br />
CMB and CMA<br />
internally connected together,<br />
isolated from GND<br />
= Factory default<br />
Automation and Control Solutions<br />
Honeywell<br />
Honeywell Limited-Honeywell Limitée<br />
1985 Douglas Drive North 35 Dynamic Drive<br />
Golden Valley, MIN 55422 Scarborough, Ontario <strong>63</strong>-<strong>2600</strong>-1<br />
MIV 4Z9<br />
www.honeywell.com
Change language