NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Control keypad 95(110)
7
Multimonitoring items (P6.5.4)
Honeywell alpha-numeric keypad features a display where the user can monitor even three actual
values at the same time (see chapter 7.3.1 and chapter Monitoring values in the manual of the
application you are using). On page P6.5.4 of the System Menu you can define if it is possible for
the operator to replace the values monitored with other values. See below.
READY
READY
I/Oterm
I/Oterm
I/Oterm
P6.5.4 P6.5.4 P6.5.4
enter
Multimon. items
ChangeEnable
Multimon. items
ChangeEnable
Figure 7-17. Enabling the change of multimonitoring items
READY
Multimon. items
ChangeDisable
7.3.6.6 Keypad settings
Further customization of the frequency drive operator interface can be undertaken in the Keypad
settings submenu under the System menu.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#)
associated with the keypad operation:
Default page (P6.6.1)
READY
I/Oterm
I/Oterm
S6.6 P6.6.1
Keypad settings
P1P5
Figure 7-18. Keypad settings submenu
This menu allows the user to set the location (page) to which the display automatically moves as the
Timeout time (see below) has expired or as the power is switched on to the keypad.
If the Default Page value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the right arrow menu button once to enter the edit mode. Change the number of the
Main menu with the Browser buttons. Pressing the right arrow menu button once again enables editing of
the number of the submenu/page. If the page to move to by default is at the third level repeat the
procedure. Confirm the new default page value with the Enter button. Return to the previous step anytime
by pushing the left arrow menu button.
0.
READY
Default page
I/Oterm
READY
I/Oterm
READY
I/Oterm
READY
enter
CONFIRM CHANGE
Default page
0.
Default page
Default page
0. 1.
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
Figure 7-19. Default page function
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com