NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

7
94(110) Control keypad
Note! Store the password in a secure location! No changes can be made unless a valid password
is entered!
Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated the text *locked* will appear on the display when the parameter
value is edited.
NOTE: This function does not prevent unauthorized editing of parameter values.
Enter the edit mode by pushing the right arrow menu button . Use the Browser buttons to change
the parameter lock status. Accept the change with the Enter button or return to the previous level
with the left arrow menu button Menu button left.
READY
READY
READY
I/Oterm
I/Oterm
I/Oterm
M6 S6.5 S6.5.2
System Menu
S1S9
Security
P1P4
Parameter Lock
ChangeEnable
S6.5.2
READY
I/Oterm
Parameter Lock
ChangeEnable
enter
S6.5.2
I/Oterm
READY
Parameter Lock
ChangeDisabl
Figure 7-15. Parameter locking
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature of the control keypad to facilitate the commissioning of the
frequency drive. If selected active, the Start-up Wizard prompts the operator for the language and
application of his/her choice and then returns to the starting menu or page.
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press
the Menu button right once to reach the edit mode. Use the Browser buttons to set value Yes and
confirm the selection with the Enter button. If you want to deactivate the function follow the same
procedure and set the parameter value No
P6.5.3
READY
I/Oterm
Startup wizard
No
P6.5.3
READY
I/Oterm
Startup wizard
No
P6.5.3
I/Oterm
READY
Startup wizard
Yes
enter
CONFIRM
CANCEL
Figure 7-16. Activation of Start-up wizard
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com