NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Honeywell Description of Parameters 203
1209 Input switch acknowledgement 6 (2.2.7.32)
Select the digital input to acknowledge the status of the input switch. The input switch
is normally a switch fuse unit or main contactor with which the power is fed to the
drive. If the input switch acknowledgement is missing, the drive trips at Input switch open
fault (F64). The parameter is available for NXP drives only.
1210 External brake acknowledgement 6 (2.2.7.24)
If no acknowledgement is received within given time the drive will generate a brake fault.
The parameter is available for NXP drives only.
1213 Emergency stop 6 (2.2.7.30)
Select the digital input to activate the emergency stop input to the drive. When the digital
input is down the drive stops as per the parameter definition of ID1276 Emergency stop
mode. The parameter is available for NXP drives only.
1218 DC ready pulse 6 (2.3.3.29)
Charge DC. Used to charge the inverter drive through OEVA type of input switch. When
the DC link voltage is above the charging level a 2-second pulse train is generated to
close the input switch. The pulse train is OFF when the input switch acknowledgement
goes high. The parameter is available for NXP drives only.
1239 Inching reference 1 6 (2.4.16)
1240 Inching reference 2 6 (2.4.17)
These parameters define the frequency reference when inching is activated.
The parameter is available for NXP drives only.
1241 Speed share 6 (2.11.5)
Defines the percentage for final speed reference from received speed reference.
1244 Torque reference filtering time 6 (2.10.10)
1248 Load share 6 (2.11.6)
Defines the percentage for final torque reference from received torque reference.
1250 Flux reference 6 (2.6.27.32)
Defines how much magnetization current will be used.
1252 Speed step 6 (2.6.19.23, 2.6.29.24)
NCDrive parameter to help adjusting the speed controller.
1253 Torque step 6 (2.6.19.24, 2.6.29.25)
NCDrive parameter to help adjusting the torque controller.
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com