NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

7
86(110) Control keypad
7.3.6 System menu (M6)
The System menu can be entered from the main menu by pushing the right arrow menu button
when the location indication M6 is visible on the display.
The controls associated with the general use of the frequency drive, such as application selection,
customised parameter sets or information about the hardware and software are located under the
System menu. The number of submenus and sub pages is shown with the symbol S (or P) on the
value line.
On page 87 is a list of the functions available in the System menu.
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com