NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Control keypad 89(110)
7
7.3.6.1 Language selection
The HMI control keypad offers the user the possibility to control the frequency drive through the
keypad in the language of your choice.
Locate the language selection page under the System menu. Its location indication is S6.1. Press
the right arrow menu button once to enter the edit mode. As the name of the language starts to
blink choose another language for the keypad texts. Confirm the selection by pushing the Enter
button The blinking stops and all textual information on the keypad is presented in the language
chosen. Return to the previous menu anytime by pushing the left arrow menu button
READY
M6
I/Oterm
S6.1
I/Oterm
System Menu
S1S11
Language
English
READY
READY
S6.1
I/Oterm
I/Oterm
S6.1
Language
English
enter Langue
Francais
READY
Figure 7-9. Selection of language
7.3.6.2 Application selection
The user can select the application desired by entering the Application selection page (S6.2). This
is done by pushing the right arrow menu button when on the first page of the System menu.
Change the application by pushing the right arrow menu button once again. The name of the
application starts to blink. Browse through the applications with the Browser buttons and select
another application with the Enter button.
In this phase, the display requests whether the parameters of the new application are to be
uploaded to the keypad. If so press the Enter button Pushing any other button leaves the
parameters of the previously used application saved in the keypad. For more information, see
Chapter 7.3.6.3.
For more information about the Application Package, see the NX Application Manual.
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com