NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
140 Description of Parameters Honeywell<br />
15 = Thermistor fault or warning (Appl.2)<br />
15 = Torque limit supervision (Appl.3456)<br />
16 = Fieldbus input data (Application 2)<br />
16 = Reference limit supervision<br />
17 = External brake control (Appl. 3456)<br />
The thermistor input of option board indicates<br />
overtemperature. Fault or warning depending on par<br />
ID732.<br />
The motor torque goes beyond the set supervision<br />
low limit/high limit (par. ID348 and ID349).<br />
Fieldbus input data (FBFixedControlWord) to DO/RO.<br />
Active reference goes beyond the set supervision low<br />
limit/high limit (par. ID350 and ID351)<br />
External brake ON/OFF control with programmable<br />
delay (par. ID352 and ID353)<br />
18 = Control from I/O terminals (Appl.<br />
External control mode (Menu M3; ID125)<br />
3456)<br />
19 = Frequency drive temperature limit Frequency drive heatsink temperature goes beyond<br />
supervision (Appl. 3456)<br />
the set supervision limits (par. ID354 and ID355).<br />
20 = Unrequested rotation direction (Appl. Rotation direction is different from the requested one.<br />
345)<br />
20 = Reference inverted (Appl. 6)<br />
21 = External brake control inverted (Appl. External brake ON/OFF control (par. ID352 and<br />
3456)<br />
ID353); Output active when brake control is OFF<br />
The thermistor input of option board indicates<br />
22 = Thermistor fault or warning<br />
overtemperature. Fault or warning depending on<br />
(Appl.3456)<br />
parameter ID732.<br />
23 = Fieldbus input data (Application 5) Fieldbus input data (FBFixedControlWord) to DO/RO.<br />
23 = Analogue input supervision<br />
Selects the analogue input to be monitored. See par.<br />
(Application 6)<br />
ID356, ID357, ID358 and ID4<strong>63</strong>.<br />
24 = Fieldbus input data 1 (Application 6) Fieldbus data (FBFixedControlWord) to DO/RO<br />
25 = Fieldbus input data 2 (Application 6) Fieldbus data (FBFixedControlWord) to DO/RO<br />
26 = Fieldbus input data 3 (Application 6) Fieldbus data (FBFixedControlWord) to DO/RO<br />
Table 8-8. Output signals via DO1 and output relays RO1 and RO2.<br />
315 Output frequency limit supervision function 234567 (2.3.10, 2.3.4.1,<br />
2.3.2.1)<br />
0 No supervision<br />
1 Low limit supervision<br />
2 High limit supervision<br />
3 Brake-on control (Application 6 only, see chapter 9.1 on page 210)<br />
If the output frequency goes under/over the set limit (ID316) this function generates a<br />
warning message via the digital output DO1 or via the relay output RO1<br />
or RO2 depending on the settings of parameters ID312…ID314.<br />
Automation and Control Solutions<br />
Honeywell<br />
Honeywell Limited-Honeywell Limitée<br />
1985 Douglas Drive North 35 Dynamic Drive<br />
Golden Valley, MIN 55422 Scarborough, Ontario <strong>63</strong>-<strong>2600</strong>-1<br />
MIV 4Z9<br />
www.honeywell.com
Change language