NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Control keypad 103(110)
7
7.3.7 Expander board menu (M7)
The Expander board menu makes it possible for the user 1) to see what expander boards are
connected to the control board and 2) to reach and edit the parameters associated with the
expander board.
Enter the following menu level (G#) with the right arrow menu button At this level, the user can
browse through slots (see page 60) A to E with the Browser buttons to see what expander boards
are connected. The lowermost line of the display shows the number of parameters associated with
the board. It is possible to view and edit the parameter values in the same way as described in
chapter 7.3.2. See Table 7-12 and Figure 7-27.
Expander board parameters
Code Parameter Min Max Default Cust Selections
P7.1.1.1 AI1 mode 1 5 3
1=0…20 mA
2=4…20 mA
3=0…10 V
4=2…10 V
5=–10…+10 V
P7.1.1.2 AI2 mode 1 5 1 See P7.1.1.1
P7.1.1.3 AO1 mode 1 4 1
1=0…20 mA
2=4…20 mA
3=0…10 V
4=2…10 V
Table 7-12. Expander board parameters (board NXOPTA1)
READY
I/Oterm
D:NXOPTC2
G1G2
READY
I/ Oterm
Monitor
V1V2
READY
I/Oterm
Expander boards
G1G5
READY
I/Oterm
C:NXOPTC1
G1G2
READY
I/Oterm
Parameters
P1P4
READY
READY
I/Oterm
Slave address
126
I/Oterm
Slave address
126
enter
CHANGE VALUE
CONFIRM CHANGE
READY
I/Oterm
Baud rate
Auto
Figure 7-27. Expander board information menu
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com