NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

18(110) Technical data
4.2.2 NX_6 – Mains voltage 525—690 V
High overload = Max current IS, 2 sec/20 sec, 150% overloadability, 1 min/10 min
Following continuous operation at rated output current, 150 % rated output current (IH)
for 1 min, followed by a period of load current less than rated current, and of such
duration that the r.m.s output current, over the duty cycle, does not exceed rated output
current (IH)
Low overload = Max current IS, 2 sec/20 sec, 110% overloadability, 1 min/10 min
Following continuous operation at rated output current, 110% rated output current (IL)
for 1 min, followed by a period of load current less than rated current, and of such
duration that the r.m.s output current, over the duty cycle, does not exceed rated output
current (IL)
All sizes up to and including FR9 are wall mounted available with NEMA1 enclosure and
NEMA12 as option. All sizes above and including Fr10 are standalone NEMA 1
NXP units.
Mains voltage 525-690 V, NEMA 1/12, EMC-level H
Frequency
drive type
Motor shaft power (575V) and current
Low overload High overload
P [Hp]
(575V)
I(L)
P [Hp]
(575V)
I(H)
I(max)
Size / prot. FR/IP
Dimensions
WxHxD
(in)
Weight
(lb)
NX_ 0030 C 3 4.5 2 3.2 6.4 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0040 C 4 5.5 3 4.5 9.0 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0050 C 5 7.5 4 5.5 11.0 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0075 C 7,5 10 5 7.5 15.0 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0100 C 10 13.5 7,5 10 20.0 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0150 C 15 18 10 13.5 27 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0200 C 20 22 15 18 36 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0250 C 25 27 20 22 44 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0300 C 30 34 25 27 54 FR6/NEMA 1/12 7.7x20.4x9.3 39.7
NX_ 0400 C 40 41 30 34 68 FR7/NEMA 1/12 9.33x23.3x10.1 77.16
NX_ 0500 C 50 52 40 41 82 FR7/NEMA 1/12 9.33x23.3x10.1 77.16
NX_ 0600 C 60 62 50 52 104 FR8/NEMA1/12 11.4x29.9x13.5 127.9
NX_ 0750 C 75 80 60 62 124 FR8/NEMA1/12 11.4x29.9x13.5 127.9
NX_ 1000 C 100 100 75 80 160 FR8/NEMA1/12 11.4x29.9x13.5 127.9
NX_ 1250 C 125 125 100 100 200 FR9/NEMA 1/12 18.9x45.3x14.3 321.9
NX_ 1500 C 150 144 125 125 213 FR9/NEMA 1/12 18.9x45.3x14.3 321.9
NX_ 2000 C 200 208 150 170 289 FR9/NEMA 1/12 18.9x45.3x14.3 321.9
NXP 2500 C 250 261 200 208 375 FR10/NEMA 1 23.4x79.4x23.7 661.4
NXP 3500 C 350 325 250 261 470 FR10/NEMA 1 23.4x79.4x23.7 661.4
NXP 4000 C 400 385 350 325 585 FR10/NEMA 1 23.4x79.4x23.7 661.4
NXP 4600 C 450 460 400 385 693 FR11/NEMA 1 31.3x79.4x23.7 815.7
NXP 5000 C 500 502 450 460 828 FR11/NEMA 1 31.3x79.4x23.7 815.7
NXP 5500 C 550 590 500 502 904 FR11/NEMA 1 31.3x79.4x23.7 815.7
NXP 6000 C 600 650 550 590 375 FR12/NEMA 1 47.6x79.4x23.7 1322.8
NXP 7000 C 700 750 600 650 470 FR12/NEMA 1 47.6x79.4x23.7 1322.8
NXP 8000 C 800 820* 600 650 585 FR12/NEMA 1 47.6x79.4x23.7 1322.8
Table 4-2. Power ratings and dimensions of the NX, supply voltage 525—690V
Note: The rated currents for FR10 to FR12 are all valid at an ambient temperature of 104 °F
(40°C).
* Maximum ambient temperature 95 °F (35°C)
Note: The rated currents in given ambient temperatures are achieved only when the switching
frequency is equal to or less than the factory default.
4
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com