NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Honeywell Description of Parameters 129
Example 3:
Given values:
Par. 2.1.12, P = 100%
Par. 2.1.13, I-time = 0.00 s
Par. 2.1.14, D-time = 1.00 s
Min freq. = 0 Hz
Error value (setpoint – process value) = ±10%/s Max freq. = 50 Hz
As the error value increases, also the PID output increases according to the set values
(D-time = 1.00s)
Hz
PID output
Error value
D-part=10%=5,00 Hz
D-part= -10%= -5,00 Hz
P-part=100% *PID error = 5,00Hz/s
10%
1,00 s
NX12k72
Figure 8-5. PID output with the values of Example 3.
t
133 Preset speed 8 4 (2.1.22)
134 Preset speed 9 4 (2.1.23)
135 Preset speed 10 4 (2.1.24)
136 Preset speed 11 4 (2.1.25)
137 Preset speed 12 4 (2.1.26)
138 Preset speed 13 4 (2.1.27)
139 Preset speed 14 4 (2.1.28)
140 Preset speed 15 4 (2.1.29)
Speed
Multi-step speed Multi-step speed Multi-step speed Multi-step speed
sel. 1 (DIN4) sel. 2 (DIN5) sel. 3 (DIN6) sel. 4 (DIN3)
P2.1.22 (8) 0 0 0 1
P2.1.23 (9) 1 0 0 1
P2.1.24
(10)
0 1 0 1
P2.1.25
(11)
1 1 0 1
P2.1.26
(12)
0 0 1 1
P2.1.27
(13)
1 0 1 1
P2.1.28
(14)
0 1 1 1
P2.1.29
(15)
1 1 1 1
Table 8-5. Multi-step speed selections with digital inputs DIN3, DIN4, DIN5 and DIN6
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com