NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Cabling and connections 67(110)
6.2.3.2 Jumper selections on the OPT-A1 basic board
The user is able to customise the functions of the frequency drive to better suit his needs by
selecting certain positions for the jumpers on the NXOPTA1 board. The positions of the jumpers
determine the signal type of analogue and digital inputs.
On the A1 basic board, there are four jumper blocks X1, X2, X3 and X6 each containing eight pins
and two jumpers. The selectable positions of the jumpers are shown in Figure 6-29.
Figure 6-28. Jumper blocks on OPT-A1
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com
6