NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

7
100(110) Control keypad
STOP READY
I/Oterm
T1T5
STOP READY
READY
I/Oterm
I/Oterm
S6.8.2
Trip counters Clr Optime cntr Clr Optime cntr
Not reset
Not reset
STOP READY
STOP READY
STOP READY
I/Oterm
I/Oterm
I/Oterm
Clr Optime cntr
Reset
enter
Clr Optime cntr
Reset
Clr Optime cntr
Not reset
Software (S6.8.3)
Figure 7-24. Counter reset
The Software information page includes information on the following frequency drive software
related topics:
Page
Content
6.8.3.1 Software package
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Table 7-9. Software information pages
Applications (S6.8.4)
At location S6.8.4 is the Applications submenu containing information about not only the
application currently in use but also all other applications loaded into the frequency drive. The
information available is:
Page
Content
6.8.4.# Name of application
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
Table 7-10. Applications information pages
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com