11.07.2015 Views

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

9448+/9448ESINTRODUCTIONThe 9448+ and 9448ES Alarm Control Panels are fully programmable 7 zonecontrol panels with Full and Part Set, designed for domestic installations.The 9448ES is an end station version designed for domestic and small commercialinstallations.In the 9448+ the control panel comprises a single printed circuit board,with microprocessor electronics, mounted in a Polycarbonate casing with ahinged lid. On the outside of the lid is a backlit soft rubber keypad and a columnof LED (Light Emitting Diode) displays. Up to two optional 9427 RemoteKeypads can be connected to the control panel and used in exactly the sameway as the keypad on the control panel. Note that the captions on the keyshave a different arrangement.For the 9448ES the control unit comprises a single printed circuit board, withmicroprocessor electronics, mounted in a steel box with a slide off lid. Up tofour 9427 remote keypads can be connected to the control unit.Operating temperatureHumidity9448+DimensionsWeight9448ESDimensionsWeightPower SupplyTechnical Specification-10º to +50ºC.80% RH.h x w x d 210 x 210 x 65mm.Approx 1.1kg (without stand-by battery).= h x w x d 234 x 243mm x 87mm.= Approx 3.0 kg (without stand-by battery).System Power Supply 230VAC (Ambient Temp. 20 º C).Quiescent Panel Power 50mA nominal.Active Panel Power150mA nominal.9427 Remote Keypad 20mA.9448+Standby Battery12 Volt, 2.1AH rechargeable lead-acid, GelType battery.Battery Spaceh x w x d 55 x 185 x 30mm.9448ESStandby Battery= 12 Volt, 7AH rechargeable lead-acid, GelType battery.2 of 12 496328 Issue 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!