Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

95EN, 85EN, 65ENoutCODE LOCKED #### User number #### attempted to use their passcode whilst lockedoutCODE TAMPER Keypad locked out for 5 minutes due to invalid entry of passcodeCOMMS FAILED On-board modem failed to communicate with ARCCOMMS TEST CALL Communications test call startedCONFIG CHANGE ## Configuration change for user ##DATE CHANGED AT System date changed atDATE CHANGED TO System date changed toDEFAULT USER User 01 (manager) code defaultedDEFAULT USER ## Not usedDEFAULT USER ### Not usedDEFAULT USER #### Not usedDEFERRED SET:- Deferred set on partitionsDL DISCONNECT FL) Downloader disconnected incorrectlyDL DISCONNECT OK Downloader disconnectedDURESS CODE ## Duress alarm from user number ##DURESS CODE ### Duress alarm from user number ###DURESS CODE #### Duress alarm from user number ####ENG HW DEFAULTED Control unit factory resetENGINEER ARRIVES Engineer is logged on the systemENGINEER DEPARTS Engineer is logged off the systemENTRY TIME-OUT:- Entry mode timed out for partitionsENTRY ZONE #### Entry mode started from zone number ####EXIT CANCELLED:- Exit mode cancelled for partitionsEXIT STARTED:- Exit mode started for partitionsEXT LINE FAULT Not usedEXT LINE RESTORE Not usedFACTORY RESTART Factory default loadedFAULT 4K4 #### Zone has 4k4 faultFIRE ALARM #### Fire alarm from zone number ####FIRE PARTITIONS:- Fire alarm on partitionsFIRE RESET:-Fire Alarm resetFIRST KNOCK #### First activation of zone number #### (zone with Double-Knockattribute)FROM REMOTE #,## Not usedHI-SECURITY SET: Partitions set using "High Security" featureID LOOP RESTORED Short circuit cleared from ID loopID LOOP SHORTED ID loop is short-circuited63 of 72