Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

770r12. Connect the transmitter Module to the control panel. Figure 13 showsan example using relay outputs on a 9752.Figure 14 shows a similar example using open collector outputs (forexample on from a 9651).13. Connect the receiver Module to the sounder (see previous section).14. Power up both Modules.Panel Connections(relay O/P e.g 9752)Figure 13.Panel Connections(open collector O/Pe.g 9651)Figure 14.TestingUse the output test commands of the 9752 or 9651 to check that the transmitteris signalling the receiver correctly to operate both bell and strobe.Disconnect the tamper return from the sounder to the sounder receiver. Thecontrol unit should show a bell tamper.26 of 30 Issue 1