Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

9x5xCommandKey in:47 Partition A Alarm Response – 47ynypartitioned system onlyn = 0 Keypad sounders only Y1 Local (all sounders, nocomms)2 Full (all sounders andcomms)48 Lockout Keypads During 48ynyEntryn = 0 Off Y1 OnNote: In a partitionedsystem, option 1 showsabcd to indicate that thesetting affects all partitions.You cannot change thepartitions affected.49 Duress Coden = 0 Disabled Y1 Enabled50 CSID Codennnn Central Station ID for= remote reset50ynnnnynone51 Set Time and Date 51yddymmyyyyhhymmydd Day of the month (01–31)mm Month of the year (01–12)yy Year (00–99)hh Hour of the day (01–23)mm Minute of the hour (01–59)52 Omit Alarm 52ynyn = 0 Alarm contacts only Y1 Alarm and tampercontactsCommandKey in:53 Abort User/Engineer Reset 53ynyn = 0 Use option selected in YCommand 331 User reset after anaborted alarm54 Supervision Time 54ynyn = 0 Supervision time slow1 Supervision time fast Y55 Supervision Response 55ynyn = 0 Supervision response Ytamper1 Supervision responsealarm2 Supervision responsefault3 Supervision responsesilent56 Number of Digits in Access 56ynyCodesn = 0 Four-digit codesY(default user = 1234)1 Six-digit codes(default user = 123456,default installer = 567890)57 Battery Load Test – not 9751 57ynyn = 0 Disabled Y1 Enabled58 Day Tamper User/Engineer 58ynyResetn = 0 User Reset Y1 Installer Reset59 External Sounder Tamper 59ynyn = 0 Negative voltage tamperYreturn1 End of line 2k2 resistor60 Level/Partition B Final Exit 60ynyOperation – single systemonlyn = 0 B=FE = FE (Final Exit) Y1 B=FE = NA (NormalAlarm)46 of 76 Issue 1