Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

95EN, 85EN, 65ENALARM PARTITIONS: Alarm in partitionsATE L.F. ALLAll networks from a communicator to an ARC are unavailableATE L.F. RESTORE The network connection from a communicator to an ARC has beenrestoredATE L.F. SINGLE A network connection from a dual-path communicator to an ARC isunavailableAUTOSET # OFF Autoset timer offAUTOSET # ON Autoset timer onAUX RESTORE #### Technical alarm from zone number #### resetAUX/BELL TAMPER Aux/bell tamperAUXILIARY #### Technical alarm from zone number ####AUXILIARY # TAMP Not usedAUXILIARY FUSE Auxiliary Fuse failedBATTERY FAULT Not usedBATTERY LOAD TST Battery load test carried outBATTERY LOWBattery voltage is lowBATTERY MISSING Battery is not connectedBATTERY RESTORE Battery restored to healthy conditionBEAM PAIR #### First activation of a beam pair zone number ####BELL BOX TAMPER Not usedBELL FUSEBell fuse trippedBELL TAMP OMIT Bell tamper omitted after confirmation timer has expiredBELL TESTED:- Bell tested for partitionsBELLS ACTIVE:- Bell active for partitionsCHANGE CODE ## User code for user ## changedCHANGE CODE ### User code for user ### changedCHANGE TAG ## User tag changed for user ##CHANGE TAG ### User tag changed for user ###CHNG CODE #### User code changed for user ####CHNG TAG #### User tag changed for user ####CNFG CHANGE ### Configuration change for user ###CNFG CHANGE #### Configuration change for user ####CODE ## Passcode entered for user number ##CODE ### Passcode entered for user number ###CODE #### Passcode entered for user number ####CODE LOCK # OFF Code lock number # is offCODE LOCK # ON Code lock number # is onCODE LOCKED ## User number ## attempted to use their passcode whilst locked-outCODE LOCKED ### User number ### attempted to use their passcode whilst locked-62 of 72