Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

4608Introduction4608The 4608 Passive Infra-Red Detector is an indoor only dual element movementdetector designed for use with the 4600 control-panel, 4660/75Multiscan, 4612-2 Channel-or 4618/9-8 Channel-Receiver.It incorporates a dual element Infra-Red sensor with adjustable interchangeablefresnel lenses which will give 90º wide angle vertical curtain, horizontalcurtain (pet alley) and narrow beam long range detection. The detector hasbeen designed to have a high signal to noise ratio and RFI immunity. ThePCB is fully ground planed to assist in reducing false alarms. A double edgesignal processing circuit is incorporated for added immunity. The 4608 issupplied as standard with the wide angle lens.IMPORTANT: Do not mount the unit closer than 6 inches to the ceiling, otherwiseyou will not be able to remove the lid of the unit.Technical SpecificationCurtain lens01037 UK-00.Long range lens01036 UK-00.Wide angle lens01035 UK-00.Voltage9 Volt Alkaline. MN 1604, 6F22, PP3.Current15 Microamps Quiescent (includes PIR andRadio).Temperature range-10º to 50º C. Humidity up to 80% (noncondensing).Detection speed0.2 to 3 metres per second.Alarm period 2s open in Alarm then locked out for 2.5minutes.Warm up time5 minutes from battery insertion.PIR PCB LayoutNote: To place the “OZW” link, see “Testing”.496372 Issue 1 23 of 34