Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

768r/769r5. Press Set.The display shows:Jamming (JA)SPThe 768r can signal attempts to interfere with signals from the transmitters ithas learned. If the 768r detects jamming then it lights the Jamming LED andoperates the Jamming relay.To enable Jamming detection:1. Enter programming mode if the 768r is not already there.The display shows:Ln2. Press Select until the display shows the Jamming command.The display shows:JA3. Press Set.The display shows E if the jamming detection is enabled, or D ifjamming detection is disabled.4. Press Select until the display shows the option you require.5. Press Set.The display shows:JAQuery (??)If you wish to see what type of transmitter the receiver has allocated to achannel the you can use the Query command. The display shows a two digitcode indicating the transmitter type as follows:Code Transmitter00 Door Contact01 PIR/Glass Break02 Not used03 Pendant04 Fire/Smoke Detector05 Reserved for future use.06 Reserved for future use.07 Reserved for future use.08 Telecommand09 Reserved for future use.10 Control Unit11 Reserved for future use.Issue 1 25 of 28