Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

9x5x131: SIA Report Mode5. Useful InformationSIA reports are called telegrams. Each telegram contains the siteidentification number (normally six digits) and relevant event information. Theamount of information reported depends on the SIA mode that you select:Basic, Summary, Intermediate or Full. The following table shows the types ofreport for each mode; use this to decide which mode is appropriate for theinstallation. Each mode also contains all the reports in the mode above it.Option0 Basic (default)1 Summary2 Intermediate3 FullThe system also provides a "custom" mode, which allows any combination ofevent information, but you have to use Downloader to create the requiredcombination.Note: The control unit delays reporting/logging either mains loss, or exitingengineering with mains loss, by 15-18 min (chosen at random). Thecontrol unit delays reporting/logging either mains restore, or exitingengineering with mains restored, by 60-90 sec (chosen at random). Ifyou select a Scandinavian default in Command 0, the control unitwaits at least 60 minutes before reporting.BASICEvent SIA Code CID CodeALARM CONFIRM BV 139BURG BA 130BURG RESTORE BR 130‡DURESS HA 121DURESS RESTORE HR 121‡EXIT TIMEOUT EA -EXPANDER TAMPER TA 137EXPANDER TAMPER RESTORE TR 137‡FIRE FA 110FIRE RESTORE FR 110‡60 of 76 Issue 1