Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

770r2. Press SET.The bottom LED shows the state of output relay one.Flashing = normally closed.Glowing steadily = normally open.3. Press SELECT repeatedly to select one of the fourrelays.xnxn4. Press SET.The sounder gives a double “beep” and the LED forthe selected output glows:Flashing = normally closedGlowing steadily = normally open.5. Press SELECT to change the output polarity.The LED changes from fl ashing to steady every timeyou press SELECT.6. Press Set to confi rm the change.The sounder gives a double “beep” and and thedisplay shows menu 5.Selecting An Operating Mode (Menu 7)Note: Use Dipswitch 1 to select either IR Learn or Radio Learn BEFORE youselect a mode.When delivered from the factory, the unit defaults to operating mode 1. Whenyou select a new mode the unit restores all factory defaults and deletes anylearned detectors.1. Press SELECT until menu 7 appears on the LEDs:16 of 30 Issue 1