Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

8841Figure 4.6. Take the SIM card for the provider you intend to use and make sure thatthe security code is either disabled or set to “0000”.7. Slide the SIM card into the holder. Make sure the missing corner on thecard is at the bottom right.8. Fit the 8841 module to the sockets on the control unit PCB (see Figure5).Figure 5.9. Feed the antenna cable through the notch at the top of the control unitPCB and around the top and side of the tag reader. Gently trap the cablebetween the PCB and wall of the case.10. Remove the backing paper on the glued side of the antenna. Fix theantenna inside the case as shown in Figure 5. Note that the adhesive onthe antenna is fast acting. You will not be able to reposition the antennaonce you have put it in place.11. Present the back of the case to the case front and re-connect the siren,battery and speaker. See Figure 3.4 of 8 Issue 1