Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

8400/8440/9056IntroductionThe 8400, 8440 and 9056 Digital Communicators are auto dialling modemsthat can communicate with alarm receiving equipment using the ScancomFast Format. All communicators are available in two versions. The -00versions are designed for dedicated telephone lines that do not connect toany other equipment. The -01 versions should be used for telephone linesthat have other equipment (for example, fax or answer machines) connectedin series.Each communicator stores its operating program in a removable Non VolatileMemory (NVM) chip. The communicators are programmed by removing theNVM chip and inserting it into a 7200/7300 NVM programmer. Once theprogram has been loaded the from the 7200/7300, the NVM chip is insertedback into the communicator.The 8400 and 8440 are designed for use by any alarm control panel. The9056 is designed to plug on to Scantronic panels, or any other manufacturer’spanel that provides the Scantronic standard plug-on connectors.8400Figure 1. 8400 PCB and Connectors2 of 8 496352 Issue 1