Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

9x5x1. INTRODUCTIONThe table below shows the differences between control panel typesPanel TypeFeature 9651 9751 9752 9853EN50131-1/PD6662 grade (max) 2x 2 2 2Maximum zones 8 24 32 40Partitions 1 Either 4 Either 4 Either 4Full and part sets 1 & 3 OR 1&3 Or 1&3 Or 1&3User codes (including 1 engineercode)50 50 50 50Digital communicator outputs 0 0 0 8Plug-by communicator outputs 8 8 8 12On-board transistor outputs 3 3 1 6On-board relay outputs 0 0 2 2On-board modem No Yes Yes YesSerial port No No Yes YesPrinter connector No No No YesEvent log entries 700 700 700 700See "Compatible Equipment" on page 1 for details of compatible devices, includingkeypads and expanders.KeypadsThe control unit supports the connection of the 9940, 9941 and 9943keypads, and also the (obsolete) 9930 keypad. The 994x range of keypadsare a direct replacement for the 9930. The 9940 and 9943 keypads have aproximity tag reader coil fitted inside the case and can work with the sameproximity tags as the 934 proximity reader module. The 9941 has no detectorcoil fitted. The 9943 can also be connected to AX10 external proximity tagreader. All three keypads provide connections for an external panic alarmswitch and an exit terminate switch. The display is a two-line 16-characterLiquid Crystal Display (LCD) that can show alarm information, programmingsettings and other information. There are three LEDs that have the followingfunctions.Note: Depending on how the system is set up, the LEDs may not operateuntil a user code is presented.Issue 1 3 of 76