Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

762rDefaultsWhen supplied from the factory the receiver has the following defaultprogram:TransmittersNoneSounder (Sn)Infra red learn (Ir)DisabledEnabledSupervision (SP) 29Jamming detection (JA)EnabledMenu StructureThe available commands are arranged in a simple menu. To move betweencommands press Select. The list below shows the commands and theirfunction.Command FunctionLnLADLSGSAOPSnIrSPJA(Ln) Manually learn a transmitter to a specific channeland device number.(LA) Automatically learn a transmitter to the nextavailable free channel and device number(dL) Delete learned transmitters. (You can delete alltransmitters at once, or selected transmitters.)(SG) Measure and record the signal strength of aspecific transmitter.(SA) Measure and record the signal strength of alllearned transmitters.(OP) Program output to specific modes.(Sn) Sounder enable/disable.(Ir) Infra-red learn enable/disable.(SP) Supervision enable/disable/time.(JA) Jamming detection enable/disable.?? (??) Query set up. Use this command to show whattype of transmitters the receiver has learned for eachchannel. (See Table 2 on page 21.)GO(GO) Leave programming mode.Issue 1 13 of 24