Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

808IntroductionThe 808 is a programmable Alarm System suitable for domestic or smallcommercial premises.The system comprises an end station in a shielded case, and up to fourseparate keypads. The end station provides:• Connections for up to eight Fully Supervised Loop (FSL) or ClosedCircuit zones (selectable during programming).• Three outputs, two fully programmable.• Pins for fitting a plug-on communication device. Any device thatcomplies with the Scantronic plug-on footprint can be fitted.The installer can program the system from the keypad, which provides aneight character Liquid Crystal Display (LCD). The programming interface isarranged into a set of numbered menus that lead the installer through theinstallation process.The 808 software provides a flexible installation that can meet many differentneeds. The system can provide for up to 8 identified users. The 808 allowsusers to set the system to four different security Levels (for example full setand three part sets) which can be programmed by the installer. Individualzones can be programmed as Flexi-Zones, which change behaviourdepending on which security Level is set.The 927 LCD KeypadLevels A to D LEDs(Set or Unset)PowerScroll and Levelsetting keysEdit KeysKeyboard withbacklit soft rubberkeysOBSOLETE PRODUCTFigure 1. 927 Operator Controls and Displays8 Character LiquidCrystal DisplayOptional programmablepanic alarm keys. Presskeys 1 and 3 togetherOptional programmablecontrol function keys.Press keys 7 and 9together.Menu and Enter keysThe 927 LCD keypad provides an eight character super twist LCD display, agreen Power LED, and four red Level status LEDs. The 927 also providesterminals for one zone, in addition to those supplied by the end station.2 of 22 496336 Issue 1