Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

95EN, 85EN, 65ENOption 93-5: Printing System ParametersLog Functions 5System Print[Configuration 1Print : Noe.g. |Users 2Print : NoTo select an item to print:" Press | or ¬ to scroll through, then press r1. SELECT ITEMS TOPRINT[Press [ to begin printing2. BEGIN PRINTINGYou can use this option to print details of how the system is set up. You canselect the following items to print.1 – ConfigurationPrints the details of all General, DD243 and EN50131 configuration options.2 – UsersFor the engineer and each defined user, this prints the user number, name,type, partitions and allocated menus.3 – ZonesFor each defined zone, this prints the zone number, type, partitions,description, attributes and resistances.Log Event CodesEventDescription--- NO EVENT --- Not used### LECS or REMS The number of LEC or keypads logged on to system after a relearn### NODE R# ADD Keypad added to MSNode. First # is the network No. Next ## isthe device No. R# is the keypad No.### NODE R# LOST Keypad removed from MSNode### NODE R# TAMP Tamper on keypad attached to MSNode### NODE'S The number of Nodes logged on to the system after a re-learn### MSNODE'S The number of MSNodes logged on to the system after a re-learn#### OFF TEST Zone number #### taken off test#### OMITTED Zone number #### omitted#### REINSTATED Zone number #### reinstated60 of 72