11.07.2015 Views

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

7510rRadio Supervision Programmable.Access code 4 digits, all four digits may be any number 0 to 9,giving 10,000 differs.Code blocking Blocked for 90s after four incorrect codes in series.RadioRadio SectionOperating frequency 868.6625MHz Narrowband.EN 300 220-3.EN 300 330-2Transmitter rangeTeleficationThe range of the transmitters compatible with thiscontrol unit depends on the environment in whichthey are installed. As a guideline, most transmitterswill work up 200m range in free space conditions.CommunicationsSpeech messages can be configured to be up to 44s long (one 12s homemessage and four consecutive alarms messages of 8s each).Built in PSTNThis product meets the performance criteria of D2, M2, S1, I0, T2 and A0 asdescribed in EN50136-1-1 subject to network conditions.ATS ratingATS 2 (prEN50131-1)PSTNScancom Fast Format, SIA I, SIA II, SIA 3 and SIA3 Extended.Social AlarmScancom, Scancom Fast Format, and Tunstall.This product can share a PSTN line with other telephony or fax equipment.GSM/ISDN/Ethernet/GPRSUses plug on module with proprietary interface between control unit andmodule.Power SupplyThe internal power supply is an off-line switching type. This product complieswith the requirements of EN50131-6 Type A power supply at Grade 2 andenvironmental class 2.Mains power supply 230VAC, 80mA max, 40mA min, +10%/-15%,50/60Hz ±5%.Standby Battery 6 x 1.2V 2000mAh AA rechargeable NiMH.Standby time: more than 12 hours.Max recharge time: less than 72 hours.Monitoring includes Mains fail, battery low voltage, battery failure.Issue 1 7 of 24

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!