Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

7510rElectromagnetic CompatibilityImmunityConforms to EN50130-4.EmissionsConforms to EN61000-6-3.OutputsO/P 1& 2Voltage free, single pole relay contacts rated24VDC @ 1A or 120VAC @ 0.5A.InputsZone 33 and 34 Fully Supervised Loop.FusesThe control unit has a T400mA mains fuse.Electrical SafetyConforms to EN60950-1.Compliance StatementsThis product is suitable for use in systems designed to comply with PD 6662:2004 at grade 2X and environmental class II.This product complies with the requirements of CLC/TS 50131-3:2003 atgrade 2 and environmental class II.This product complies with the requirements of EN50131-6:1997 at grade 2and environmental class II.This equipment is compliant with EN 50136-2-1:1998 and EN 50136-2-2:1998. It allows the alarm transmission system to meet the performancerequirements of EN 50131-1:2006 ATS 2 provided that:a) It is installed in accordance with the installation instructions.b) The connected PSTN is functioning normally.c) The ARC is adequately equipped.3. InstallationWarning: Exposure to Radio Frequency RadiationThe radiated output power of this device is below those levels consideredsafe by European exposure limits. Nevertheless, when fitting the productplace it in such a manner as to minimise the potential for human contactduring normal operation. To minimise exposure, users should be more than200 mm from the device during normal operationTools RequiredFlat screwdriver (small).Philips screwdriver.Drill.8 of 24 Issue 1