Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

4605Technical SpecificationDimensionsh x w x d 102 x 44 x 20mm.Input supply: 3.7V Lithium battery.Temperature-10°C to 55°C. Humidity up to 80% (noncondensing).Frequency173.225 MHz.Output power1mWFully DTI approved to MPT1344 for alarm use only. No licence required.BS6799 Classes 1-3.Coding The TransmitterRemove the self-tapping screws and carefully ease the top of the caseupwards.Set the site code on the large 10-way DIL switch. Note that UP is ON andDOWN is OFF. Do not set all switches to ON or the transmitter will not workcorrectly.4600Set switches 1 to 6 to the site-code of the 4600. Set switches 7-10 as shownbelow. The top button will set or unset the panel. The personal attack buttonswill trip zone 10 (as Personal Attack).Figure 13. Coding for 46004618/9Set switches 1 to 7 to the site code of the 4618/9. Set switches 8 to 10 to thezone number. The top button triggers channel A. The side buttons triggerchannel B. For further information refer to the 4618 Installation Guide.18 of 34 496372 Issue 1