Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

905 IDISIntroduction905 IDIS LIM INSTALLATIONThe 905 IDIS Line Interface Modules (LIM’s) can replace 9505 lims whenretrofitting an 8 series control system in an existing 9500 installation. The 905has 5 closed circuit double pole inputs and 5 transistorised programmableoutputs.SpecificationDimensionsh x w x d 155 x 105 x 30mm (Enclosure).Quiescent Current35mA.Output Current5 Open collector transistors rated at100mAeach output @ 12 volts DC.Inputs5 Double Pole Closed circuit input loops.Alarm Loop = CCT and Anti-Tamper loop =A/T.Programming Notes For 905If you give the first LIM zone number 09, then the control panel gives thefollowing zones numbers 10, 11, 12, and 13, there is no need to programthese zone numbers.IMPORTANT NOTE: If the LIM enclosure tamper switch is activated once the unit isinstalled then the panel reports in the log that ALL FIVE zone tampers havebeen violated. However the FTA (First to Alarm) display to the end user willdisplay ONLY the first programmed zone in the LIM.8 of 16 496340 Issue 2