Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

8136 User FacilitiesElectrical NoiseThe IDIS system is very robust with regard to electrical noise but running theIDIS bus for long distances tied close to single, three phase electrical, or datacables is not advised. Cables for electrical machinery are particularly bad andshould be kept at least 0.2m away if at all possible. IDIS cables can crossover electrical cables with immunity. If a long cable run adjacent to electricalcables cannot be avoided then consider using twisted pair cable for that partof the IDIS run.User FacilitiesIn User Mode the 8136 can store unique access codes for up to 95 useraccess codes. Each user can be linked to one or more Partitions. There arethree types of user:• The Supervisor (User 01), who can change all other user's accessto the system and who is always linked to all Partitions.• The Master User, who can change ordinary user's access to thesystem, provided they belong to the same Partition as the Masteruser.• Ordinary users, who can cannot change their level of access touser functions.The Supervisor can give users 02 to 95 one or more of the following accessrights:• Be a Master User (change access codes and authority for themselvesand any ordinary user in the same Partition).• Enter a Duress code.• Either Full use (set and unset the Partitions they are linked to) orArm only (set but not unset a Partition).• Omit Zones.• Change Time and Date.• Read and print the system log.• Change Zone names.• Reset Partitions.A Master user can give any ordinary user belonging to the same Partition theaccess rights listed above. A Master User cannot change the access rights ofanother Master User or the Supervisor, or any user not belonging to theirPartition.The system records some events in the log as being performed by users 00,and 96 to 99:496339 Issue 4 39 of 44