Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

790rIntroductionThe 790r Radio Strength Monitor and 734REUR-01 Test Transmitter can beused for site surveying, installation, servicing and fault finding with theCooper Security Ltd 7xxr series of transmitters and receivers.Physical DescriptionFigure 1 shows the Radio Strength Monitor. At the top of the unit is a BNCsocket to attach the standard quarter wave antenna. Note the "Learn"sensor, used for learning the identity of the Test Transmitter. The front of theunit holds two four-position control switches, and a column of ten LEDsforming the display. Inside the unit is a loudspeaker to give an audible signalof R.F. presence. At the back of the case is the battery compartment, whichhouses a PP3 alkaline battery.11. Learn SensorFigure 1. 790r Radio Strength MonitorThe Test Transmitter is a standard 734rEUR-01 Door Contact, see Figure 2.Note that the activity LED is used for transmitting the identity of the TestTransmitter to the "Learn" sensor on the Radio Strength Monitor.The unitrequires one CR2 battery.2 of 6 Issue 1