Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

904 IDISIntroduction904 IDIS LV I/O INSTALLATIONThe 904 Low Voltage Switching IDIS I/O unit is designed to allow connectionof a detection device such as a PIR or IR beam or any other type of devicewith Closed Circuit contacts and also to control a Low Voltage device via theprogrammable output low voltage switching relay. The input and the outputcan be programmed separately or mapped to allow the input to be linked tothe output.SpecificationDimensionsQuiescent CurrentOutput switching loadWired inputs forWired Outputh x w x d 155 x 105 x 30mm (Enclosure).20mA (relay energised).2A at 24VDC.Closed Circuit Tamper loop (Tamp),Closed Circuit Alarm Loop (CCT).1 set of clean change over contacts.6 of 16 496340 Issue 2