Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

7510ror a timeout occurs. The social care station can send commands to thecontrol unit by using DTMF tones during the 2-way speech call. Thecommands available are:Function SCANCOM SCANFAST TUNSTALLTalk DTMF ‘2’ N/A DTMF ‘C’Listen DTMF ‘1’ N/A DTMF ‘*’Toggle DTMF ‘*’ N/A N/AEnd this call DTMF ‘5’ N/A DTMF‘#’Play ‘Home’ DTMF ‘3’ N/A N/Amessage.Speech Dialler Message ControlThe person receiving the speech messages can control the link by sendingDTMF tones back to the control unit (usually by pressing buttons on thetelephone key pad). The commands available are:FunctionKeyTalk DTMF ‘2’Listen DTMF ‘1’Toggle DTMF ‘*’End this call DTMF ‘5’Play ‘Home’ and ‘alarm’ message DTMF ‘3’Clear down DTMF ‘9’5. TestingIf you think that part of the system is not working correctly then you can usethe Test option to test various peripherals.The Test option also lets you check the identity of Telecommands, Pendantsand Tags.To start testing, make sure the system is idle then:1. Enter the User Menu and select Test.The display shows the Test menu.2. Select the part of the system that you wish to test.You can test each part listed in the Test menu as follows:SirenPress On/Off to turn the siren on and off again. The display shows the word"On" when the siren operates.Issue 1 21 of 24