Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

703r3. Release Select.The display shows the first command in the menu:If you wish to enter programming while the unit is operating then openthe case lid. If the unit is connected to an alarm control panel thetamper alarm may sound. Follow steps 1 to 3 above.Leaving ProgrammingTo leave programming:1. Press and hold Select for four seconds.The display shows:2. Release SelectThe transmitter stores any changed settings and returns to normaloperating mode.If you put the lid back on without pressing Select for four seconds then the703r will return to normal operating mode after 60 minutes, but withoutstoring any of the changes you have made.Menu StructureThere are seven commands available, arranged in a simple menu. To movebetween commands press Select. The table below shows the commandsand their function.9 of 18