Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

95EN, 85EN, 65ENSET GENERAL FLT System set with a general fault presentSET NO ACTIVITY Not usedSET PARTITIONS:- Partitions setSET PSTN FAULT System set with a line fault presentSET PSU BATT FLT System set with a PSU Battery fault presentSET PSU FUSE FLT System set with a PSU Fuse fault presentSET PSU PWR FLT System set with a PSU Power fault presentSET SUPER WARN:- Log message displayed when the control unit has been set withsupervision warning on radio zone(s)SET WITH AC FAIL Partitions set with a mains fault presentSET WITH FLT 4K4 System set with 4k4 zone faultSET WITH MSK FLT System set with zones maskedSH.KEY OFF #### Shunt key zone #### deactivatedSH.KEY ON #### Shunt key zone #### activatedSHNT #### REINST Shunted zone #### reinstatedSHUNT CODE ## User ## of type "Shunt" entered passcode to isolate zonesSHUNT CODE ### User ### of type "Shunt" entered passcode to isolate zonesSHUNT CODE #### User #### of type "Shunt" entered passcode to isolate zonesSHUNT END #### Not usedSHUNT GROUP ## Shunt Group ## used to isolate zonesSHUNT START #### Not usedSHUNT ZONE #### Zone #### shuntedSILENT PA #### Silent Panic Alarm zone #### activatedSUMMER CHANGED Not usedSUMMER TIME SET Time changed at Summer changeover dateT.SWITCH # OFF Time switch number # offT.SWITCH # ON Time switch number # onTAMP 1 OMITNot usedTAMP ZONE #### Not usedTAMP. REST. #### Not usedTAMPER #### Tamper alarm from zone number ####TC #:##:# BAT LO Telecommand has a low batteryTC #:##:# BAT OK Telecommand has a healthy batteryTECHNICAL #### Technical zone #### activatedTEST FAIL #### Zone number #### failed whist on testTEST TOTAL 00## Total number of zone tested during walk testTEST ZONE #### Not usedTIME CHANGED AT Time changed at specified timeTIME CHANGED TO Time changed to specified time66 of 72