Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

768r/769rDefaultsWhen supplied from the factory the receiver has the following defaultprogram:TransmittersNoneSounder (Sn)DisabledInfra red learn (Ir)EnabledSupervision (SP) 29Jamming detection (JA)EnabledMenu StructureThe available commands are arranged in a simple menu. To move betweencommands press Select. The list below shows the commands and theirfunction.Command FunctionLn(Ln) Manually learn a transmitter to a specific channel anddevice number.LA(LA) Automatically learn a transmitter to the next availablefree channel and device numberDL(dL) Delete learned transmitters. (You can delete alltransmitters at once, or selected transmitters.)SG(SG) Measure and record the signal strength of a specifictransmitter.SA(SA) Measure and record the signal strength of all learnedtransmitters.OP(OP) Program output to specific modes.Sn(Sn) Sounder enable/disable.Ir(Ir) Infra-red learn enable/disable.SP(SP) Supervision enable/disable/time.JA(JA) Jamming detection enable/disable.?? (??) Query set up. Use this command to show what type oftransmitters the receiver has learned for each channel.(See Table 2 on page 26.)GO(GO) Leave programming mode.Issue 1 17 of 28