Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

MRNode1. IntroductionThe MRNode is a Class 6 Radio Expander with internal aerial. The expanderallows you to connect eight radio detectors to an M-Series or 95EN system.In addition each expander also provides for up to eight telecommands, PAtransmitters or pendants.The MRNode connects to the control unit by way of the Node Network wiring.The radio detectors operate on 868.6625MHz.The MRNode can work with the devices listed in 700 Series TransmittersCompatibility List.Each radio detector and remote setting device contains a digital identity codethat the MRNode unit ‘learns’ during installation. The code is one of over 16million possibilities. This ensures that the MRNode will not respond to anyother detectors or telecommands apart from the ones it has learned.Figure 2 shows the interior of the MRNode unit.Note:1. The MRNode is designed to work with the M-Series and 95EN control units.Do not attempt to connect the MRNode to any other control unit, unless recommendedin that control unit manual.2. Please read MRNode Commissioning Instructions for details on how to programthe control unit.3. Cooper Security Ltd recommend that you connect only MSNodes and MSP-SUNodes to Networks containing an MRNode.2 of 10