Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

9x5x1. Remove the front cover from the keypad(s) to which you intend to fitthe module. Remove the cable clips (item 4 in Figure 7).2. Fit the 934 module to the connector pins, as shown in Figures 8 and9.Figure 8. Fitting a 934 Module (over the keypad)Figure 9. Fitting a 934 Module (in position)3. Secure the module in position with a screw through the lug in the toprightcorner (Figure 10).Figure 10. Securing lug on 934 module16 of 76 Issue 1