Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

8740, 87507. Present the back of the case to the case front and re-connect thesiren, battery and speaker. See Figure 4).8. Seat the back of the case into the case front. Refit all four screwsholding the case together. See Figure 3).9. Run the module cable from its access point to the 7510r wall plate.Select a suitable cable entry in the wall plate and feed the RJ45connector through.10. Fit the module cable RJ45 connector into the socket on the edge ofthe module, see Figure 6).Figure 6) Connect ISDN Lead.10. Present the case to the wall plate and re-connect the ribbon cable,see Figure 7).Figure 7) Connect Ribbon Cable11. Fit the case to the wall plate and refit the securing screws (see Figure1)).5 of 6