Cooper TP Workshop Manual_Scant:Layout 1 7/8 ... - Cooper Security

9x5xCommandKey in:61 Level/Partition B Entry Route 61ynyOperation – single systemonlyn = 0 B=ER = ER (Entry Route) Y1 B=ER = FE (Start entrytimer)62 Level/Partition B Exit Mode 62ynyn = In a single system:0 Timed low tone onYsetting1 Instant (no exit tone)2 Silent (double "beep"after exit time)3 Sets exit mode the sameas Level AIn a partitioned system:0 Timed full tone onYsetting1 Terminated (terminatedby button)2 Final Door (last door hasa detector)3 Instant (no exit tone)4 Silent (double "beep"after exit time)5 Lock Set (terminated bylock switch)CommandKey in:63 Level/Partition B Alarm 63ynyResponsen = In a single system:0 Keypad sounders only1 Internal and keypadYsounders2 Local (all sounders, nocomms)3 Full (all sounders andcomms)In a partitioned system:0 Keypad sounders only Y1 Local (all sounders, nocomms)2 Full (all sounders andcomms)64 This command has beenreplaced by Command 202.65 Level/Partition B Exit Time 65ynyn = 1 10 seconds2 20 seconds Y3 30 seconds4 45 seconds5 60 seconds6 120 seconds66 Forbikobler Keypads andPartitions –partitioned system onlyn = A Assign keypad toPartition AB Assign keypad toPartition BC Assign keypad toPartition CD Assign keypad toPartition DNote: Each keypad can beassigned to any or allpartitions. The default is forall keypads to belong to allpartitions.66ynnnnyIssue 1 47 of 76