MaxSea Operator Manual version 12.6 - Furuno USA

More documents

Recommendations

Info

Tracks Tracking on / off Tracking On To activate the tracking function, click the Track on/off button in the Toolbar. The button appears selected in the Toolbar during all the time the tracking function is activated . You can also use the shortcut F5 if you have selected it from the [Route] menu. The track is displayed on the chart and saved . If several positioning systems are connected, the program can save the track of the different positioning systems (see paragraph bellow Several positioning systems connected ). No position The Track on/off and MOB button are not available and appear in grey color. It indicates that <strong>MaxSea</strong> is in "0 POS" configuration. Note: if you often remain in tracking mode, the display speed of the chart can be effected due to lack of memory; particularly if the save interval is short. In this case, either the time between saves or periodically save or erase the track . Tracking Off Click on the Track on/off button again in the Toolbar to turn off the tracking function. The program gives you the option to save the track permanently in a "PTF" file on the hard drive (Layer [WGS84] by default). 103
Page 1:
MaxSea Operator Manual version 12.6
Page 4 and 5:
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12:
Page 15 and 16:
USER GUIDE: MaxSea New Faetures 3
Page 17 and 18:
User Interface Looking at the Chart
Page 19 and 20:
Toolbar Cursor Data User Interface
Page 21 and 22:
Notes: (1) - there is a display for
Page 23 and 24:
User Interface 2. To return to the
Page 25 and 26:
Bearing tool The Bearing tool is a
Page 27 and 28:
Select tool (Finger symbol) Lasso R
Page 29 and 30:
Plotting Drawing Type User Interfac
Page 31 and 32:
NavNet system MaxSea-NavNet Overvie
Page 33 and 34:
Legend (1) - GPS Antenna (2) - Rada
Page 35 and 36:
WARNING : NavNet system You have to
Page 37 and 38:
GPS on the chart Your GPS on the ch
Page 39 and 40:
2. Click the Misc tab for calling u
Page 41 and 42:
How to enable the Auto-Scale functi
Page 43 and 44:
GPS on the chart • Enter directly
Page 45:
GPS on the chart 1 - Click on the M
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 57 and 58:
Routes Routes overview A Route is a
Page 59 and 60:
(1) Route using QuickWaypoints, (2)
Page 61 and 62:
Routes Center All your Routes are d
Page 63 and 64: Name To assign a own name of a rout
Page 65 and 66: Fig. 1 shows you the selected Leg o
Page 67 and 68: SOG SOW Speed Over Ground - it is t
Page 69 and 70: XTE Cross Track Error - The distanc
Page 71 and 72: Add Waypoints to a Route Additional
Page 73 and 74: Reverse the Selected Route Routes W
Page 75 and 76: more information, refer to the rela
Page 77 and 78: Waypoints Waypoints Overview Waypoi
Page 79 and 80: access and modify the properties of
Page 81 and 82: displaying waypoint. modifiable. FI
Page 83 and 84: Active Route Data Transfer Device O
Page 85 and 86: On a selected waypoint drawn on the
Page 87 and 88: Active Route Note: the software aut
Page 89 and 90: Then choose [New Search and Rescue
Page 91 and 92: Data Transfer Device Data Transfer
Page 93 and 94: Note: Tracks (1) - According to the
Page 95 and 96: NS = Not Supported Data Transfer De
Page 97 and 98: Data Transfer Device - Rte valid na
Page 99 and 100: Data Transfer Device - Wpt valid na
Page 101 and 102: .ErrorChar : 0x\00 .EofChar : 0x\00
Page 103 and 104: .Parity : 0 .StopBits : 0 .XonChar
Page 105 and 106: .fRtsControl : 0 .fAbortOnError : 0
Page 107 and 108: .XonChar : 0x\11 .XoffChar : 0x\13
Page 109 and 110: - - - - - - - - - - - - - - - - - -
Page 111 and 112: - MxDemandeStatutGPS : PNTI,000 ---
Page 113: When GPS upload function is activat
Page 117 and 118: There are a series of options with
Page 119 and 120: 2. The line color 3. The line smoot
Page 121: Tracks The Planning Route (1) is cr
Page 124 and 125: MaxSea Operator Manual version 12.6
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 287 and 288:
3D View 2D/3D Function Overview The
Page 289 and 290:
1. Red arrow shows the depth at the
Page 291 and 292:
Slope Size Representation The scale
Page 293 and 294:
A magnifying glass drawing indicate
Page 295 and 296:
Chart Grid Chart 3D View 283
Page 297 and 298:
Note : the 3D window is in "hardwar
Page 299 and 300:
3D camera options Black Contrast (h
Page 301 and 302:
PBG Real Time Bathymetry PBG Real T
Page 303 and 304:
Seabed Analysis No echo sounder is
Page 305 and 306:
Seabed Analysis Otherwise, choose a
Page 307 and 308:
Seabed Analysis Seabed analysis - t
Page 309 and 310:
• In this example, one sees that
Page 311 and 312:
Changing Seabed Classification Scal
Page 313 and 314:
Seabed graphic Interface: 1. To def
Page 315 and 316:
• Click on a zone to select it.
Page 317:
Seabed Analysis If the (Depth value
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 417 and 418:
Performance Performance Module Over
Page 419 and 420:
ship’s course and speed, the VMG,
Page 421 and 422:
Restart Excel. If a prompted to ena
Page 423 and 424:
Performance MaxSea will interpolate
Page 425 and 426:
Display the polar window Activate t
Page 427 and 428:
According to the Wind speed : Perfo
Page 429 and 430:
Performance Lay-lines are displayed
Page 431 and 432:
Performance Note: to change the pre
Page 433 and 434:
Note that two data among the four c
Page 435 and 436:
The "Data Trend Center" graph Perfo
Page 437 and 438:
Customize the display To activate a
Page 439 and 440:
Weather Routing What Weather Routin
Page 441 and 442:
Calculate a Weather Routing Before
Page 443 and 444:
Weather Routing The routing is calc
Page 445 and 446:
"Display isochrons" item selected "
Page 447 and 448:
Weather Routing The Route List show
Page 449 and 450:
Create and Play a Weather Routing A
Page 451:
AWS Apparent Wind Speed - When the
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 465 and 466:
Logbook Navigation logbook The Navi
Page 467 and 468:
Two manners to display a logbook wi
Page 469 and 470:
A logbook entry is stored in the na
Page 471 and 472:
Logbook The criteria (course, speed
Page 473 and 474:
Logbook The archived logbook is the
Page 475 and 476:
Fill in the text dialog boxes and t
Page 477 and 478:
Chart Window Controls Configuring y
Page 479 and 480:
3 Charts 3 Charts, 1 Profile 4 Char
Page 481 and 482:
Chart Window Controls • Right-cli
Page 483 and 484:
Chart Window Controls • Holding t
Page 485 and 486:
3. Paste in a spreadsheet or databa
Page 487 and 488:
Default The chart is automatically
Page 489 and 490:
Ctrl + V Paste a selected object fr
Page 491 and 492:
ALT + F7 Sounder Shift + (*) Right/
Page 493 and 494:
Software Options Setting Up PBG/2D/
Page 495 and 496:
(4) - Display 3D settings • Check
Page 497 and 498:
To set up the measurement units tha
Page 499 and 500:
choose your display mode Customizin
Page 501 and 502:
1. Go to the [Display] menu and cho
Page 503 and 504:
Setting Up Fuel Consumption Select
Page 505 and 506:
Display XTE The XTE alarm warns you
Page 507 and 508:
3. Track color 4. Auto saving Softw
Page 509 and 510:
Software Options 2. Choose a the ch
Page 511 and 512:
IMPORTANT Chart Source 2 Chart sour
Page 513 and 514:
Option Range Operation Gain level %
Page 515:
Time Variable Gain Level 0-9 follow
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 525 and 526:
Index 3 3D ........................
Page 527 and 528:
NavNet System .....................
Page 529:
517
show all

MaxSea Operator Manual version 12.6 - Furuno USA

Create successful ePaper yourself

Delete template?

Save as template?