MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Now add 2 rows and add additional wind angles.
Enter wind angles approximately every 30 degrees. Note that you should add additional rows or columns; for example,
you add rows in increments of 15 degrees or less and columns in increments of 5 or less.
After you have defined the first line and first column, enter the data in the cells according to the polar graphs or tables
provided by the boat manufacturer.
When finished, select the menu “For the Polar” and choose “Save as Polar.”
Name the Polar file and press “Save.” The new Polar file will be created in the “My Documents” folder.
Open MaxSea, and choose [File] and [Open.] Open the Polar file you just created.
If you have the Performance Module of MaxSea, choose “Performance;” and then, “Polar Curves Center.”
Performance
410
Data Trend Center
Polar Curves Center
Display LayLines on
Chart...
LayLines Data
Select “All polar” and make sure that the polar curves are coherent