MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
Depth Profile With MaxSea and NavNet Modes
"Depth Profile: MaxSea Mode" window details :
332
1. Depth Profile Label : when NavNet received is available, you will get Information on Depth below surface from
NavNet NMEA (-22.7 m), Frequence (LF and see related topic for how to learn more about Transmission
Frequency), Scale (1: 2 500) and Exaggeration (X4). When no NavNet received is available, you will not have
echogram overlay and message of "NO SWEEP" is displayed at top-left Depth Profile window.
2. Depth Profile Outline : is shown in the Depth Profile window as a graph filled in with orange when Depth
information coming in from NMEA. See related topic : Depth Profile Outline
3. Surface trail : when NavNet received is available, you will get the trail NMEA Depth on speed based.
4. X Axis : is distance-based (same as SPEED SENSING PRR) If the boat does not move, the echogram does
not advance. For example School fishes appear with the same size independently of the boat speed.
5. Echogram : is the NavNet Sounder Echo layer overlay
6. A-Scope : Fixed width, right in front of the boat, window vertical scroll&scale. Same colors as echo. Updated
every half a second in MaxSea Mode (speed base).
7. Forward looking Depth Profile : only available with 2D/3D Module, it Shows Forward Looking Depth Profile in
right part of the window . The forward looking depth profile distance is fixed to 500m in front of the boat. See
related topic : Forward looking Depth Profile
8. Tide corrected : the yellow line of the graph shows you the forward depth profile without tide correction unlike
the blue filled graph which includes tide correction from nearest harbor. The graph and tide elevation are
simultaneously updated when new GPS position is received.).
9. Y Axis : is the depth range
10. Temperature : is shown in the Depth Profile window as a red line when Sea Surface Temperature data
information coming in from NMEA.
11. Cursor Location: shows simultaneously location where the cursor is on the chart zone area and along the
depth profile outline. See related: Locate your cursor
12. GPS : represented by the boat symbol which extends to keel depth. See related topic : GPS Display
13. Keel Depth Extending: by default distance is equal to 0. See related topic to enter a value : Option: GPS and
track