MaxSea Operator Manual version 12.6 - Furuno USA

2. The line color
3. The line smoothing
Note: you can change one or all of the characteristics.
If the line width option is selected, click on the pop up menu and choose a type of width.
If the line color option is selected, either choose a fixed color or a color according to a data like the depth for example.
If the line smoothing option is selected you can choose between three options (medium, light or important)
IMPORTANT
Tracks
The smoothing function can modify the track and you may lost the initial saving. It is recommended to make a copy of the
file before doing any modification on the track.
to validate all the modify click OK and CANCEL to quit without saving.
Edit Color Range
This function allows you to customize your track color according to selected received data.
To change the color of the track go to the [Utilities] menu and select [Option: GPS/Track]. This brings up a settings
dialog box.
1 - Click the track tab in the upper of the window.
2 - In the bottom of the window click in the "According to.." radio button to assign a color to a track according to the
parameter that you wish : for example, the track depending on the SOG , you can choose one color for the 0.0 to the 4.0
knots interval, and an other one for the 4.0 to 20.0 knots interval, so that you can see your track at a glance.
Note: the information depends on the electronic equipment connected.
3 - First, for example select the SOG interval on which color will be apply.
4 - Click on the Apply button to confirm.
5 - Then, choose between the 16 colors proposed to you by using the Number of colors pop-up
Note: you can customize the colors by right clicking on a color.
6 - You can also define more precisely the value intervals by right clicking any value slider:
7 - Finally, click on the Apply button.
Recording all data option in the GPS/Track settings dialog box
107