MaxSea Operator Manual version 12.6 - Furuno USA

The Status allows the user to know which of his charts are available, and if not, what is the type of problem.
List of available statuses, that can happen:
1. OK : when all is okay
Electronic Charts
2. Chart File Not Found: when a part of a chart is lost (".kap" file for instance) or the chart was not found in the
place where it was saved. To solve your problem you can click on Manage, select and open again the file.
Problem may occur when removing the CD ROM during the use or the network fails during recording charts or
charts are recorded on your PC but the folder has been removed or moved to another place.
3. Encrypted File Not Found: when Maptech v4 permits are lost.
To sort content in the table depending on your choice:
Double-click in a chosen cell header will increase or decrease column content depending on the selected data type
(numeric or alpha numeric). For example, Double-click in "Manufacturer" cell header to display all charts which belong to
Maptech.
To directly access a chart selected in the catalog:
1. Select a line in the table
2. Click " Center on the chart ", the window simultaneously displays the chart which you have just selected.
Click "Manage" to access the management of your charts which are in your ownership. in instance to reopen charts or to
validate the Chart Catalog.
To delete a chart under the catalog list
For example when the chart status indicates "Chart File Corrupted", you can select it and click Delete to delete it.
To close the catalog, click on "OK", it is Simultaneously updated if you have modified the catalog.
Vector charts
Vector Charts
The vector charts are Images defined by sets of straight lines that are defined by the locations of the end-points. Vector
graphics require much less storage space than raster or bitmapped graphics.
Each Vector charts are opened in the same seamless window and Chart information drop-down menu list depends on
selected vector chart.
In following example CMap NT and CMap CM93 v3 charts are opened together in the same vector chart window:
The Chart Zone Information lists all available charts and allows you to switch between them for displaying on screen
the chart that you want to see. In our example CMap NT is selected and actually displayed in the Chart Window and
Vector CMap CM93 v3 is also opened.
173
CMap