MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
"Out of limits" positioned
When the GPS position moves off-course, a visual and audio alarm is activated. The "Out of limits" function can be
adjusted only when your route is selected on Planning route and not on active route.
Two methods are proposed for configuring this alarm:
2 - By choosing a specific X.T.E. value applied on each leg of a route.
30
1 - By choosing X.T.E. value by default:
• Select [Options...] from the
[Route ] menu.
• Choose Display XTE as true
for activating XTE alarm.
• Choose the Default Leg XTE
range by clicking in the
corresponding field.
• Enter a distance value directly
or using the virtual numeric
keyboard.
Note that the default value is
equal to 0,500Nm.
• Select a Leg by clicking it on the chart displayed and choose the "Properties" option in the contextual menu list.
• or by select a waypoint line in the Planning Route Center and click the "Properties" button on the center header
toolbar.
• The Waypoint properties window appears on the screen