MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
2 - Events part
3 - Actions part
360
Press the Browse button.
Search and choose the PTF file which contains monitoring zone areas drawing.
Choose a type of events :
1. Check Enter zone box , this allows alarm and the software will warn you each time a target
mobile enters in a zone .
2. Check Escape zone box, this allows alarm and the software will warn you each time a target
mobile leaves a zone.
3. Check Abnormal movement box, this allows alarm and the software will warn you each time
target mobile, which was stopped in a zone, restarts moving. A target is considered as
stopped when its SOG is under a limit value (SOG0). It restarts moving when its SOG is over
a limit value (SOG1) or distance from stop point is greater than a limit value. Press the
Advanced button for configuring "Abnormal movement parameters".
This part consists in how to choose the warning alarm type such as playing a sound and/or launching a program.
When an event occurs, you can:
1. Choose to play a sound by checking the Play sound box. Then click on the Browse button for searching and
selecting an audio file ("wav" extension file format ).
2. Choose to launch a personal program by checking Run executable file box. Then click on the Browse button for
searching and selecting your program ("bat" or "exe" extensions file format for example).
Notes:
1 - It is recommended to save the file in a specific folder on your PC, for after finding it easily.
2 - You can modify in real time your monitoring zones PTF file and it is simultaneously taking into account.
Click OK to validate. Your Monitoring zone is configured but not activated.
See next topic "Enable Monitoring Zone" for how to activate this function.
Enable Monitoring Zone
This function enables to activate configuring Monitoring zones which are defined in a chosen PTF file.
1. Choose [Enable Monitoring Zone] from the [Targets] menu for activating .
2. Click again on it to disable the Monitoring zone function.
3. A warning will appear if No zone to monitor is defined in the specified PTF file.
For more details about How to set up Monitoring zones see related topic Option Monitoring Zone