MaxSea Operator Manual version 12.6 - Furuno USA

MaxSea Operator Manual version 12.6
If the "Time" box is checked and a time value is defined a line is added in the Logbook:
458
When the past time is equal to the selected time since MaxSea's launch.
When the past time since the last recording is equal to the selected time.
Conditional events
In the second section you may, if you wish, enter a further save criteria.
To do so click on the "Activate conditional lines" check-box to activate it, then click on the Add button for
the choice of a conditional event. The " Add/Modify" dialog box appears and allows you different choices of
criteria:
Choose the type of conditional event, this will generate a line in the logbook. Two items are proposed:
Or
"The modification of the value is greater than" item is chosen, the delimiting value is defined and
the type of data on which you want to apply the conditional event is selected. A line will be added in
the logbook every time when the conditional event is reached. The value is compared with the last
recorded value.
"The value is cross" the delimiting value specified in the input text. A line will be added in the
logbook every time when the conditional event is reached. The value is compared with the last
recorded value and the comparison does not depend on the direction. For example if the value cross
is [10K for the SOG ] an event is created when the SOG value reaches from 9.9K to 10.1K but also
when the SOG value reaches from 10.1K to 9.9K.
To select the data criteria from the pop-up menu